Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

As an Amazon Associate I earn from qualifying purchases.
1
Aeotec
#ad
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor
#ad
Aeotec ZW100-A #ad - Multisensor 6 is the foundation of a modern smart home. Multisensor 6 will measure motion, light lux, uv, temperature, hUMIDITY, and VIBRATION. Designed and calibrated for precision, the accuracy of MultiSensor 6's sensors varies as little as ±02%. Only 1. 65 inches in size, can be installed in your home 4 different ways: on a shelf, within a wall cavity, in a corner, or on a wall as a beam sensor.
It has aes 128 bit security encryption built right in. Specifications: motion sensor : 16 feet, and 120° field of view; humidity sensor : 20% to 95%, accuracy:+/- 5% at 77°F; Temperature Sensor : 14°F -10°C ~ 140°F 60°C, accuracy: +/- 32.9°f 05°c; light sensor : 0 lux to 1000 lux; vibration sensor : acts as tamper switch, on or off; operation temperature top: -4°f -20°c ~ 140°f 40°c; storing temperature: -40°f -40°c ~ 176°F 80°C; Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA via USB cable or 2 x CR123A battery 1 CR123A battery included; Weight: 2.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - 6 oz. And it can be powered 2 different ways: by batteries or via a USB cable and adapter. 1 x cr123a included in the box. Super-small at 1. 65 inches. It's built around the latest z-wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products.
More details
#ad
2
Aeon Labs LLC
#ad
Aeotec Z-Stick Gen5, Z-Wave Plus USB to create gateway
#ad
Aeon Labs LLC ZW090 #ad - Create your own Z-Wave gateway. No software included. Z-wave plus certified. Capable of controlling up to 232 different z-wave devices, home assistant, homeseer, openhab, and able to run on both full powered PCs and low powered PCs such as Raspberry Pi, Z-Stick Gen5 works with with open source software such as Domoticz, and OpenHab2 and also works with commercially available software such as Axial Control, including those that use the more advanced Z-Wave Plus, Indigo for MacOS.
Package: 1x z-stick gen5, 1x Manual, the others are not included. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades. Compatible with z-wave enabled, home automation software including Home Assistant, OpenHab, indigo 7, Home Seer, and OpenHab2.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - With z-stick gen5 you’ll be able to create your own Z-Wave hub using readily available, and sometimes free, home automation software. For enhanced network performance and reduced downtime, Z-Stick Gen5 contains an inbuilt, rechargeable info-lithium battery. Certification number: ZC10-15060006. You’ll benefit from a system that is locally hosted and cloud free, security and privacy you can personally control, whose features, and you’ll be able to create your Z-Wave network at your own pace and within your own budget.
Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1.
More details
#ad
Similar products
3
Aeon Labs LLC
#ad
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
#ad
Aeon Labs LLC ZW100 #ad - Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera. Z-wave plus certified. No software included. Z-wave plus certified. Certification number: ZC10-15060006. Super-small at 1. 8 inches. It has aes 128 bit security encryption built right in.
The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. Designed and calibrated to be as accurate as it can be, MultiSensor 6’s accuracy varies as little as ±02%. You need a z-wave gateway which operates with the 500 series chip products to take full advantage of the device.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. Its perfectly small exterior hosts the technology for real-time intelligence. Specifications: motion sensor : 16 feet, accuracy:+/- 5% at 77°f; temperature sensor : 14°f -10°c ~ 140°F 60°C, and 120° field of view; Humidity Sensor : 20% to 95%, accuracy: +/- 32.
More details
#ad
Similar products
4
Aeon Labs LLC
#ad
Aeotec MultiSensor 6 Recessor. In-ceiling and in-wall recessed installation accessory.
#ad
Aeon Labs LLC DSE010 #ad - Despite being recessed, MultiSensor 6 can still be powered either by batteries or by mains power. Super-small at 1. 8 inches. Enables recessed, near invisible installation of MultiSensor 6. Recessor allows aeotec’s Z-Wave Plus Multisensor 6 to be installed within a ceiling or wall cavity. With recessor it gets even smaller.
Install multisensor 6, Z-Wave motion sensor, within a wall or ceiling cavity. 6-in-1 z-wave plus multisensor: motion, UV, humidity, light lux, temperature, vibration sensor.2 year battery life. Simple, spring-loaded installation. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, SmartThings, openHAB, Indigo 7, Vera.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Z-wave plus certified. Once installed it’s only invisible, emerging only 047” from the wall or ceiling. Sensor can continue to be powered either by battery or mains power via USB. Package: 1x z-stick gen5, 1x Manual, the others are not included. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
More details
#ad
Similar products
5
Aeon Labs LLC
#ad
Aeotec WallMote Quad, Z-Wave Plus Wireless Wall Switch, 4 Button, 16 Scene Remote Control
#ad
Aeon Labs LLC ZW129-A #ad - Wall switches are the most natural way to control a home. This 2 button edition of from wallMote from Aeotec is a 2-in-1 wall switch and remote control for Z-Wave home automation. Enables recessed, near invisible installation of MultiSensor 6. Sensor can continue to be powered either by battery or mains power via USB.
Powered by aeotec’s gen5 technology and built upon Z-Wave Plus, it offers around 3 months’ battery life before it needs to be recharged via the provided USB cable. Certification number: ZC10-15060006. Wireless z-wave wall switch and remote control that can control up to 16 different scenes via tap, slide up, tap and hold, and slide down.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Thin, small and easy installed anywhere in your house via the provided magnetic wall-mount plate. Offers both haptic and audio feedback when in use to confirm commands and use. Compatible with certified z-wave gateways Including Samsung SmartThings, Open Z-Wave, Vera, Jeedom, and Zipabox. Z-wave plus certified for quicker response time, optimized battery life, and best wireless range.
Install multisensor 6, Z-Wave motion sensor, within a wall or ceiling cavity. And remote controls are the most natural way to move that control around your home. As it attaches to its wall-mount using magnets, you can also easily remove it to use WallMote anywhere in your home as a remote control and easily re-attach it to the wall later.
More details
#ad
Similar products
6
Aeotec
#ad
Aeotec ZW122 Z-Wave Water Sensor 6
#ad
Aeotec . #ad - Sensor can continue to be powered either by battery or mains power via USB. Operating distance: Up to 492 feet 150 meters outdoors. Operating temperature: 0°c to 40°C 32°F to 104°F. Certification number: ZC10-15060006. Specifications: Manufacturer Part #: ZW122. Dimensions: 3. 8 cm w x 2. 4cm H. Operating humidity: 8% to 80%.
This level of sensitivity gives you the maximum amount of time to respond to an alert before serious damage occurs. Package: 1x z-stick gen5, 1x Manual, the others are not included. Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades. Compatible with z-wave enabled, home Seer, home automation software including Home Assistant, indigo 7, OpenHab, and OpenHab2.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - No software included. Z-wave plus certified. Enables recessed, near invisible installation of MultiSensor 6. Repeater: No. Built-in temperature and vibration sensors monitor local area. Super-small at 1.
More details
#ad
Similar products
7
Aeotec
#ad
Aeotec TriSensor, Z-Wave Plus S2 Motion, Temperature, Light Sensor, 3-in 1 Home Automation Security System, Battery Powered
#ad
Aeotec ZWA005-A #ad - Provides local alerts via buzzer alarm. Can attach up to two 2 sensor probes for additional coverage. Notes: requires a compatible Z-Wave controller, sold separately. The trisensor's temperature sensor communicates with and triggers your other Z-Wave devices such as a Z-Wave thermostat or motorized window coverings to optimize the room's temperature.
Sensor can continue to be powered either by battery or mains power via USB. Enables recessed, near invisible installation of MultiSensor 6. Wireless z-wave wall switch and remote control that can control up to 16 different scenes via tap, slide up, tap and hold, and slide down. Thin, small and easy installed anywhere in your house via the provided magnetic wall-mount plate.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Offers both haptic and audio feedback when in use to confirm commands and use. Compatible with certified z-wave gateways Including Samsung SmartThings, Vera, Open Z-Wave, Jeedom, and Zipabox. Z-wave plus certified for quicker response time, optimized battery life, and best wireless range. Temperature is monitored with a built-in incremental temperature sensor that accurately measures between 14 degrees F to 122 degrees F -10 degrees C to 50 degrees C to provide the perfect temperature in a room.
Manufacturer Part Number: ZWA005. S2 security: aes 128 bit communication encryption; ECDH Elliptic Curve Diffie-Hellman. Simple, spring-loaded installation.
More details
#ad
Similar products
8
Aeon Labs LLC
#ad
Aeotec Range Extender 6, Z-Wave Plus repeater
#ad
Aeon Labs LLC ZW117 #ad - Works with windows / mac / linux including Raspberry Pi to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices. Tiny but powerful; 1. 1 x 04 x 3. 5 inches in size and capable of controlling up to 232 different Z-Wave devices. Powered by 1 x cr123a battery, estimated battery life: 1 Year. Z-wave plus certification number: ZC10-18056128.
Z-wave plus wireless signal repeater and range extender. Allows for easy removal of MultiSensor 6 for changing batteries if battery powered. Compatible with all z-wave gateways including Control4, SmartThings, Fibaro, and Vera. Z-wave plus certified. Craft your own smart home with 3 levels of detecting calibration.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Compatible with certified z-wave gateways including: Samsung SmartThings, Zipabox, Domoticz, Homeseer HS3, Vera, Open Z-Wave, Isy994i ZW universal controller and more. Z-wave plus and z-wave s2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption.
Built-in temperature and vibration sensors monitor local area. Battery not packed with the box. Adjustable calibration. Small design so it does not block other outlets.
More details
#ad
Similar products
9
Aeotec
#ad
Aeotec NanoMote Quad, Z-Wave Plus S2 remote control, 8 scenes, Rechargeable, MiniMote 2
#ad
Aeotec ZWA003-A #ad - Z-wave plus Certified: Yes. Can be installed in corner, in-wall, on shelf or in downlight. Works with certified z-wave gateways and tested with Fibaro, SmartThings, openHAB, Indigo 7, Vera. Z-wave plus certified. Remote control any z-wave device connected to your Z-Wave gateway with the push of a button. Certification number: ZC10-15070011.
You can use the Aeotec NanoMote Quad indoors or outdoors. It's built with 4 buttons, each of which can control Z-Wave devices that are connected to a Z-Wave controller. Powered by 1 x cr123a battery, estimated battery life: 1 Year. It can also be recharged via usb and last up to 3 months after it's charge - or you can replace it with a new LIR2450 3.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - 6 volt battery. Small design so it does not block other outlets. You'll be able to control your home's door locks, garages, and gates with confidence knowing that the NanoMote Quad is built with Z-Wave's S2 framework. 6-in-1 z-wave plus multisensor: motion, temperature, UV, light lux, humidity, vibration sensor.
2 year battery life. Allows for easy removal of MultiSensor 6 for changing batteries if battery powered. Built-in temperature and vibration sensors monitor local area.
More details
#ad
Similar products
10
Ecolink 28617953415
#ad
Z-Wave Plus Rare Earth Magnets Door & Window Sensor, White & Brown DWZWAVE2.5-ECO
#ad
Ecolink 28617953415 DWZWAVE2.5-ECO #ad - Homeseer. Certification number: ZC10-16095239. Certification number: ZC10-15060006. Battery not packed with the box. Adjustable calibration. Enables recessed, near invisible installation of MultiSensor 6. 3-in 1 motion, light sensor. Powered by 1 x cr123a battery, estimated battery life: 1 Year. Battery is rechargeable via USB.
Wireless z-wave wall switch and remote control that can control up to 16 different scenes via tap, slide up, tap and hold, and slide down. Thin, small and easy installed anywhere in your house via the provided magnetic wall-mount plate. Offers both haptic and audio feedback when in use to confirm commands and use.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Compatible with certified z-wave gateways Including Samsung SmartThings, Vera, Jeedom, Open Z-Wave, and Zipabox. Z-wave plus certified for quicker response time, optimized battery life, and best wireless range. Compatibility: the ecolink door/window is manufacturer tested to be compatible with the following zwave Plus Home Automation HUBs or controllers: Samsung SmartThings Certified, V2, Vera Edge, V1, V3.
Perfect for most door or window applications. White or brown housings included: both white or Brown plastic housing choice included to match any décor. 3 years battery life: tamper sensing Premium design outlasts the competition and boasts a battery Life of up to 3 years.
More details
#ad
Similar products
11
Aeotec
#ad
Aeotec Smart Switch 6, Z-Wave Plus Wireless Control Plug for Home Security Automation, 15A Mini Size, Monitor Power, New Design without USB port
#ad
Aeotec #ad - Energy consumption will be displayed in the user interface of your Z-Wave gateway/controller if supported. No software included. Z-wave plus certified. Wireless z-wave wall switch and remote control that can control up to 16 different scenes via tap, slide up, tap and hold, and slide down. Thin, small and easy installed anywhere in your house via the provided magnetic wall-mount plate.
Offers both haptic and audio feedback when in use to confirm commands and use. Compatible with certified z-wave gateways Including Samsung SmartThings, Vera, Open Z-Wave, Jeedom, and Zipabox. Z-wave plus certified for quicker response time, optimized battery life, and best wireless range. Sensor can continue to be powered either by battery or mains power via USB.
Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor #ad - Provides local alerts via buzzer alarm. Battery not packed with the box. Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration. Compatible with certified z-wave gateways including: Samsung SmartThings, Zipabox, Domoticz, Vera, Homeseer HS3, Open Z-Wave, Isy994i ZW universal controller and more.
Z-wave plus and z-wave s2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption.
More details
#ad
Similar products